Mineral Bond
Request a quote
Urea-Silicate
Mineral Bond
- Appearance
- Component A: colourless liquid / Component B: dark brown liquid
- Foam factor
- at 25˚C with 1.0
- Reaction start time
- at 25˚ C in 30 - 60 seconds
The Mineral Bond is a two component, organic and mineral resin with high strength. It is designed for strata consolidation and suitable for stabilization of ground and soil for heavily cracked rock mass. The bond seals against gas penetration and stops water inflows.
Features
-
Low viscosity
The components have a low viscosity before and after mixing.
Low viscosity
The components have a low viscosity before and after mixing.
The components have a low viscosity before and after mixing.
-
Adhesion
Adhesion to the substrate is superior in both wet and dry conditions.
Adhesion
Adhesion to the substrate is superior in both wet and dry conditions.
Adhesion to the substrate is superior in both wet and dry conditions.
-
Adjustable setting time
The DSI Mineral Bond is available with an adjustable setting time.
Adjustable setting time
The DSI Mineral Bond is available with an adjustable setting time.
The DSI Mineral Bond is available with an adjustable setting time.
Product specifications
Downloads
- Appearance
- Component A: colourless liquid / Component B: dark brown liquid
- Foam factor
- at 25˚C with 1.0
- Reaction start time
- at 25˚ C in 30 - 60 seconds
- Density at 20˚C
- Component A: 1.45±0.04 g/cm³ / Component B: 1.21±0.04 g/cm³
- Viscosity at 25˚C
- Component A: 250±50 mPa*s / Component B: 200±50 mPa*s *
- Appearance
- Component A: colourless liquid / Component B: dark brown liquid
- Foam factor
- at 25˚C with 1.0
- Reaction start time
- at 25˚ C in 30 - 60 seconds
- Density at 20˚C
- Component A: 1.45±0.04 g/cm³ / Component B: 1.21±0.04 g/cm³
- Viscosity at 25˚C
- Component A: 250±50 mPa*s / Component B: 200±50 mPa*s *
- Viscosity at 10˚C
- Component A: 950±50 mPa*s / Component B: 850±50 mPa*s
- Max. reaction temperature
- at 25˚C < 110˚C
Product specification may vary by region. Please download the data sheet specific to your region.
For questions, contact us via the form on our website or the contact details provided in the data sheet. Always confirm key specifications with your local representative.
-
* *results obtained under laboratory conditions
Our range of urea-silicate
Mineral Fill
- Appearance
- Component A: colourless liquid / Component B: dark brown liquid
- Foam factor
- at 25˚ C with 40±10
- Reaction start time
- at 25˚ C in 10 - 20 seconds
Mineral Bolt
- Appearance
- Component A: pale yellow liquid / Component B: dark brown liquid
- Foam factor
- at 25˚C with 1.0
- Reaction start time
- Medium version in ~ 105 seconds
Talk to our experts about how we can help you today
